Instrument Flight
Appendix A
(ANFP)
Study Resources for Airways Navigation Flight Procedures:
[A] NATOPS Instrument Flight Manual, NAVAIR 00-80T-112
[B] Instrument Flight FTI
[C] T-45C NATOPS Flight Manual, A1-T45C-NFM-000
[D] NATOPS General Flight and Operating Instructions Manual, OPNAVINST 3710.7
[E] DOD FLIP IFR Supplement, DOD FLIP high altitude approach plates, DOD FLIP low altitude
approach plates, and FLIP General Planning
T-45C TS & IUT ANFP-01, “Airways Navigation Flight Procedures,” 2.7 hr, Classroom
Lesson Preparation:
* [A] Read Chapter 25
* [B] Read Instrument Flight Planning, Flight Procedures, Safety/Emergency Procedures sections
* [D] Read Sections 420 and 428
Reinforcement:
* Review the procedures for completing the Single-Engine Jet Flight Log and DD-175.
Lesson Objectives:
* Recall FLIPs required for flight planning
* Recall items to be checked for destination airfield
* Determine weather criteria for flight
* Recall takeoff minimums as defined in OPNAVINST 3710.7
* Determine alternate routes/airfields
* Plan route of flight
* Recall procedures for performing an enroute descent
* Determine fuel requirements for route of flight
* Prepare single-engine jet log
* Recall procedures for completing DD-175
* Recall instrument approach criteria outlined in OPNAVINST 3710.7
* Recall procedures for modifying route of flight and destination
* Recall procedures for lost communications situations
* Recall procedures for mission cockpit management
* Recall procedures for performing IFR to a contact approach
* Recall procedures for performing visual approach
* Recall procedure for performing a circling approach
* Recall procedures for performing missed approach
* Recall procedures for terminal communications
Page 135
(4-01) Original
Previous Page
