CNATRAINST 1550.6E
14 October 2003
APPENDIX G
MPTS CNATRAINST 1542 FORMAT SAMPLE (INSTRUCTOR SYLLABUS)
1. The CNATRAINST 1542 instructor syllabus contains a summary of
all the items necessary for IUT and NATOPS qualifications and
will be maintained in the standardization library. The format
outlined in this appendix is to be used in the conversion of all
Navy Standard IUT curriculums into the new MPTS format. All
chapters will be present in each 1542. If a particular stage is
not used, the first page of the chapter will include the
following statement: "This chapter does not apply to the
(applicable) phase of training."
2. The format for the IUT syllabus will be identical to the
student format (see Appendix F), except in the chapter order and
titles specifically listed below.
a. The CNATRAINST 1542 format follows standard CNATRA
instruction format from SECNAVINST 5215.1C. The font and size to
use is Courier New 12. Use Microsoft 6.0 (or newer) software.
The specific breakdown is as follows:
(1) Chapter I
-
General Instructions
(2) Chapter II
Ground Training
(3) Chapter III
NATOPS Training
(a) This chapter will use standard flight code
designations: C - Contact, I - Instrument, N - Navigation,
F - Formation, and T - Tactical. However, the events in this
chapter are specific to the NATOPS qualification. These flights
will be graded IAW NATOPS grading criteria (i.e. 1 = demonstrate,
2 = UQ, 3 = CQ, 4 = Q, and 5 = Not applicable).
(4) Chapter IV
Contact Training
(5) Chapter V
Instrument Training
(6) Chapter VI
Navigation Training
(7) Chapter VII
Formation Training
(8) Chapter VIII -
Tactical Training
(9) Chapter IX
-
Course Training Standards (CTS)
NOTE:
CTS should be numbered for easy reference.
(10) Chapter X
Master Materials List
G-1
Appendix G
Previous Page
