CNATRAINST 1542.155A
22 April 2004
BEHAVIOR STATEMENT
STANDARDS
9. Takeoff
● Perform takeoff,
● Completes the takeoff checklist.
starting with
● Adequately checks engine
clearance for takeoff
instruments.
and ending with
● Safely raises gear, and verbally
reports subsequent gear
retraction.
indication.
10. Departure
● Perform proper VFR or
● Complies with departure procedures
IFR departure
and ATC instructions.
procedures.
● Maintains IFR course 5.
● Performs an operations checklist
at or before level off.
11. Use of Controls/Trim
● Manipulate the three
● Understands flight control
primary flight
movements and resulting action in
controls.
all three primary axes.
● Properly trim the
● Recognizes balanced flight.
aircraft.
● Trims all three primary flight
controls in the appropriate
direction.
12. In-Flight Checks
● Complete checks as
● Performs:
required.
► Instrument, fuel, ops checks, as
required by FTI/NATOPS/SOP.
► Landing checklist as required by
FTI/NATOPS.
► Stall/pre-aerobatic checklist as
required by FTI/NATOPS.
13. In-Flight Planning/Area Orientation
● Visually navigate and
● Identifies nearest suitable
remain within
landing field.
prescribed working
● Adjusts mission profile for
area.
external factors (weather,
traffic, etc.).
● Maintains positional awareness
using ground references,
navigational aids, VFR charts, or
FLIP publications.
● Maintains appropriate boundaries
and altitude block within a
working area as required.
VIII-4
Previous Page
