T-45C TS, ADV & IUT ENG-23
Other T-45 Systems
b.
Description: labeled PUSH TO JETT, the
guarded momentary push-button switch is used
to jettison stores carried on pylons
7.
Weight on wheels bypass switch
a.
Location: nose wheel well, port side
b.
Description: two-position switch, weight on
wheels and bypass armament; the switch is
lever-locked at the weight on wheels position
and spring-loaded to return to weight on wheels
position when released from the bypass
position. With aircraft weight on wheels and
power connected to the aircraft, holding the
weight on wheels bypass switch at bypass
armament enables testing of armament/jettison
power supplies or verification of weapon
selection and arming capability
8.
HUD and MFD's
a.
Location:
(1) HUD, upper center MIP forward cockpit
(2) MFD, MIP both cockpits
b.
Description: displays symbologes of selected
master modes and selected weapons/mode
9.
Data entry panel (DEP)
a.
Location:
(1) Directly below HUD forward cockpit MIP
(2) Directly below gunsight aft cockpit MIP
b.
Description: consists of push-buttons and
switches for selecting modes and setting MIL
setting for manual delivery
Original (9-98)
Page 23-13
Previous Page
