STUDENT ACTIVITY GUIDE
T2 ELECTRONICS FAMILIARIZATION
In the event of a total ICS system failure (both amplifiers), the intercom mode switch is
placed in the _______________ position.
1.a. For continuous two way intercommunication the mike select switch should be in the
1.b. Circle the positions of the mike select switch.
To aid in the reception of weak UHF signals the ARC159 squelch switch should be in
the _______________ position
To use the AUX receiver as a UHF receiver the mode selector should be in the
_______________ or _______________ position.
3.a. The primary function of the AUX receiver is _______________.
For normal UHF communication, the ARR40 control must be in the _______________ or
Information that may be obtained by the TACAN system is: a. Air to station bearing and
Air to station bearing and range
Station ident tone
Air to air range
Air to air bearing
All of the above
With a dual generator failure in flight which of the equipment cannot be recovered.