Quantcast Pre-Stall Checks

 

Click here to make tpub.com your Home Page

Page Title: Pre-Stall Checks
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 



JOINT ADVANCED MULTI-ENGINE T-44A
Pre-Stall Checks. Complete the following pre-stall checks from memory prior to the first stall entry.
Have the CP review it complete for subsequent approaches to stalls.
(1)
Loose gear
Stowed.
(2)
Altitude
5000' AGL minimum (VMC to the deck) or 8000' AGL minimum
(5000' above cloud deck).
(3)
Cabin sign
Both.
(4)
Yaw damp
Off (CP checks off).
(5)
Props
1900 RPM.
(6)
Clearing turn
90 of turn at 30 AOB.
The following procedures shall be utilized:
Clean, Power Off.
(1)
Immediately after commencing a level clearing turn, set 400 ft-lbs.
(2)
Roll out after 90.
(3)
Reduce power to idle while simultaneously adjusting pitch to 10 up. Trim to 100 KIAS then stop
trimming. Maintain wings level and 10 up.
(4)
Immediately recover at the first indication of stall, utilizing standard recovery procedures.
Clean, Power On.
(1)
Immediately after commencing a level clearing turn, set 400 ft-lbs.
(2)
Roll out after 90.
(3)
Adjust pitch to 10 up. Trim to 100 KIAS then stop trimming. Maintain wings level and 10 up.
(4)
Immediately recover at the first indication of stall utilizing standard recovery procedures.
Dirty, Power Off.
(1)
Immediately after commencing a level clearing turn, set 400 ft-lbs.
(2)
Select flaps approach. Maintain altitude.
(3)
Select gear down and complete the Landing Checklist.
(4)
Roll out after 90.
(5)
Select flaps full down. Reduce power to idle while simultaneously adjusting pitch to 10 up. Trim
to 100 KIAS, then stop trimming. Maintain wings level and 10 up.
(6)
Immediately recover at the first indication of stall utilizing standard recovery procedures.
Dirty, Power On.
(1)
Immediately after commencing a level clearing turn, set 400 ft-lbs.
(2)
Select flaps approach. Maintain altitude.
(3)
Select gear down and complete the Landing Checklist.
(4)
Roll out after 90.
(5)
Select flaps full down. Adjust pitch to 10 up. Trim to 100 KIAS then stop trimming. Maintain
wings level and 10 up.
(6)
Immediately recover at the first indication of stall utilizing standard recovery procedures.
FAMILIARIZATION STAGE
1-9


Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +