T-34C AIRCRAFT SYSTEMS FAMILIARIZATION
How does the pilot turn on the power for the ICS system?
The toggle switch on the PCL must be held up to utilize the ICS. ____________(True/False)
Placing the mode selector in the GUARD position automatically sets the UHF to transmit
and receive on emergency frequency. ____________(True/False)
The pilot not having avionics command can control what items on his/her UHF panel?
Does the VOR panel display channels or frequencies? ___________
When the TACAN mode selector is placed in the STBY position ____________
information is received.
Power to the audio panel amplifier is affected by the avionics master switch.____________
When is the EMER AUDIO position of the audio panel used?
When the transponder function selector is placed in the ALT position the radar controller
reads altitude only. ____________(True/False)
Can the ELT be used outside of the aircraft?
Can the NACWS warn of collision threat with nontransponder equipped aircraft?
12. Either cockpit can transmit/receive on the VHF radio regardless of which cockpit has
command. ____________ (True/False)
13. With the front cockpit GPS unit turned off, the rear cockpit GPS unit may be used for
navigation purposes. ____________ (True/False)
14. Assuming both cockpit GPS units are turned on, which cockpit has priority for system
15. Illumination of the green GPS light indicates the double needle of the RMI and CDI are
slaved to the GPS. ___________. (True/False)