Quantcast Chapter 16: Basic Features and Ground Handling

 

Click here to make tpub.com your Home Page

Page Title: Chapter 16: Basic Features and Ground Handling
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 



CHAPTER SIXTEEN
BASIC FEATURES AND GROUND HANDLING
1600. INTRODUCTION
As student aviators, it is extremely important that you become familiar with the basic features
and ground handling requirements of the T-34C. You must also become familiar with exterior
dimensions and limitations of the aircraft. Compliance with limitations is essential to conducting
safe ground and flight operations.
1601. LESSON TOPIC LEARNING OBJECTIVES
Terminal Objective
16.0  Upon completion of this chapter, the student will demonstrate knowledge of the T-34C
basic features and ground handling.
Enabling Objectives
16.1
State the reasons why solo flight is permissible from the front cockpit only.
16.2
Recognize the exterior dimensions of the T-34C.
16.3
Recall the maximum allowable gross weight for takeoff and landing.
16.4
Select the maximum allowable airspeed above and below 20,000 feet.
16.5
Select the maximum allowable airspeeds for operation of the landing gear and flaps.
16.6
Identify the maximum allowable "G" loads at maximum gross weight.
16.7  State the maximum deflection of the nose gear and the reason for the limitation when
towing the aircraft.
16.8
Describe normal weather securing procedures and tie-down points.
BASIC FEATURES AND GROUND HANDLING
16-1


Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +