 |
|||
|
|
|||
|
Page Title:
Conversion to horizontal scissors |
|
||
| ||||||||||
|
|  ACM 1 v 1 Defensive Maneuvering
T-45C TS, ADV & IUT ACMFP-03
(2) Put lift vector in front of bandit to shallow
slice turn and miss deck
(a) If bandit rolls through without being
aware of altitude problem, bandit is
scraped off
(b) If bandit aware of altitude and your
tactic, bandit forced to put lift vector in
front resulting in reordering relative
b.
Conversion to horizontal scissors
NOTE: About 2500 ft above the hard deck is
needed for a successful nose-low roll through
the vertical to continue the rolling scissors.
(1) Fighter/bandit at top of roller will remain
nose-high and continue to pull back toward
bandit/fighter to generate overshoot
(2) Instead of rolling through vertical, aircraft
on top will reverse nose-high and pull back
toward aircraft beginning vertical pullup
resulting in horizontal scissors
c.
Disengagement from top of roller
NOTE: The opportune bugout time occurs
when the bandit is going up and the fighter is
going down.
(1) Ensure bandit’s noseup attitude
(2) Instead of performing roll
(a) Continue pull to nose-low attitude
generating maximum AOT and
minimum lateral separation
(b) Unload toward bandit’s extended 6
(c) Disengage and bug out
(05-98) Change 1
Page 3-20
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals